Tekton 5409 - 8 in. Swivel Bench Vise Bedienungsanleitung PDF herunterladen (Seite 3)

1. Use included mounting template to identify desired vise mounting location.

(Suggested placement shown in diagram below)

2. Mark and drill holes. Make certain the drilling path is clear of any hazards.

3. Install proper length and diameter bolts and flat washers through vise base.

The bolts should protrude at least 1” below bench surface. On underside of

bench surface use flat washers, lock washers, and locking nuts.* Securely

tighten vise to workbench.

SETUP AND MAINTENANCE

MOUNTING VISE

*Fasteners

not included

EDGE MOUNTCORNER MOUNT

Workbench

• Keep machined surfaces and all moving parts clean and free of dirt, chips, and

foreign materials.

• Use multipurpose grease to keep moving parts lubricated.

• Routinely apply mineral oil to machined surfaces to prevent surface rust.

1 2 3 4

Keine Kommentare

Tekton 5409 - 8 in. Swivel Bench Vise Bedienungsanleitung Seite 3